Equinox Photographic's

VIEW LENSES: (The following are especially recommended for use and are working. All have mounting flange unless stated otherwise. All have good glass unless stated otherwise. If no shutter type is mentioned, lens is in barrel only. PLEASE SEE the "Services" section for lens service options.

NOTE: knowing what lens fits your application is not easy; ask us for suggestions. Our staff uses lenses every day. Sizes of cameras that the lenses most commonly fit are listed in parenthesis. 1"=25mm in case you want to convert a size

• 203mm f7.7 Kodak Anastigmat [this model renamed Ektar shortly after this time period] in Flash Supermatic [4x5] $98

The following lenses are for display or do-it-yourselfers

• Wollensak Extreme wide angle 8x10 f9.5 [159mm] series III, rear cell only $78 excellent glass
• Caltar -S 215mm f4.8 lens front cell only exc.++ $75
• 210mm f5.6 Carl meyer type Q, CELLS ONLY, front has many coating spots, $12
• 6-3/4" f7.7 Luxar Anastigmat in working if sluggish shutter $19 exc. cond.

• Regno, medium [75mm across, 37mm front cell opening] Works. f4.5 f-stop plate, speeds to 1/100th, no flange $17

Other lens items:

• Lens mounting rings: we can fit some lenses which are missing their flange. Note: we cannot fit a lens or shutter by name - you must send the shutter or barrel! Rings virtually never were labeled as to what they fit, plus some lenses took different size rings as time passed. Most rings are only $15.

• 4x5 Graphic holders, see below
• 4 inch Graphic View metal lensboard [also fits wood Speed Graphics and many other cameras including Baco] w/35mm hole $19
• Graflex Pacemaker 4x5 distance scales: 7" with screws $12
• [3] Super Graphic and Super Speed owner's manuals @$12

Graflex Pacemaker parts

• shutter release tab - this "L" shaped piece fits by the lensboard $8
• Graflex Graphic viewfinder masks 2, 4 @ $10
• [2 sets] infinity stops - pair @$19
• distance scales: one set, plus another of the long scales. They should fit a 180mm or 200mm lens. With tiny screws $15
• Body track retainers from 2x3 model: these get broken when someone closes the camera wrong $25
• Kalart rangefinder $25
• Viewfnder, small for 2x3 $18
• leather handle for 2x3 $12
• body release cable for 2x3 $14
• nice clean lensboard retainers, labeled Crown Graphic. For 2x3, but believe fit the larger models also $12
• 2x3 bellows, exc. $22
• stripped 2x3 Pace body with good track $28

Flash cords @$10 [unless othwise stated]:

• looong Bi-post sync to strobe, [fits double prongs on shutters]- used mostly for stroboflashes or studio setups $15
• regular Bi-Post to strobe
• solenoid flash cord, to female lensboard solenoid $12
• remote trigger cord
• (2)PC to PC [both male]
• PC to sub-min
• Argus to PC
• coiled flash sync cords PC to strobe - exc+ @$5

Lenscaps: LARGE ONES click here

LEATHER and Metal ones click here

Lensboards, etc.

• 11" uncut lensboard, old $38
• Metal board. 6" with rounded corners. 3-5/8" hole $25
• Lensboard for 8x10 Eastman View - [5-3/4" sq.] new, uncut, beautiful $25
• Linhof Technika rangefinder cam - 240mm for Tech III&early IV $22
• 5x7 B&J lensboard, 70mm hole $15
• Arca Swiss recessed board $35
• 4x4" Calumet board, 66mm hole $15
• 4x4 Calumet special extension board [1-1/8" extension, 65mm hole] $25
• 4x4" special mirror finish reflective aiming lensboard, hole in middle - for aligning camera perfectly $18

FILM HOLDERS & ADAPTERS & BACKS:

• Bellows Patch material, small bottles, suitable for numerous fixes, $6.50 plus $3.00 shipping in US - Use ONLY this compound to patch bellows, never silicone or other adhesives. The bellows patch is not a glue, but a liquid designed to be used by itself; it forms the patch by painting on any leaking inside corners of the bellows. It cannot patch a large hole, for example, but heals pinholes in the corners, the most common bellows leakage. See this page for more about light leaks and Bellows Patch use.

• [2] Wood 4x5 film holders, guaranteed as usual @$5
• [5] 4x5 plastic Fidelity deluxe film holders, exc. @$8
• [4] 4x5 plastic Fidelity Elite [white top] film holders @$12
• 4x5 Grafmatic: holds 6 sheets of film, and can be used in any camera with Graflok back, such as the post-war Graphics, or any 4x5 whose groundglass opens extra wide [ask]. Historical: mared "Warner Bros." $65
• Format adapter: inserted into the back of a 9x12 cm camera, it allows the use of US-style 2-1/4x3-1/4 film holders. Made by Westphalen. With ground glass. $18
• backs and holders for European cameras - see "collectors items" section
• 8x10 roomy change bag $15
• lens ring spanner for Copal 0,1 and Compur 0,1 $8 remove or install your own lenses on lensboards
• film setpi for using film in plate holders: 6x4.5cm, 2x3"[2], 3x4[4], 5x7[1] @$5

• 5x7 darkslides @$3 send measurements
• 4x5 groundglass MASK, plastic, good for viewing full area while using, say, a rollback $2
• cable release adapters - see 35mm/medium format section
• bar to bar clamp $10
• Plans for Converting the KA-71A Fairchild Aerial Camera to 180 degree panoramic use $9.95 Postpaid
• Arctic Zone bag for 4x5 holders etc. $28